Nuts

Call us for a quote (800) 239-3403

Store Room Fasteners Inc. we carries every conceivable nut you may require we carry a large assortment of the following products:

2H Heay Hex Nut

2H Heavy Hex Nuts are the same as regular hex nut, but with a heavier pattern.

Cap Nuts

Cap Nuts are nuts with a dome shaped closed top that are mainly used for decoration.

Coupling Nuts

Coupling Nuts are long nuts used to connect threaded rod.

Flange Nuts

Flange Nuts are nuts with a built in washer.

Grade C All Metal LN

Grade C All Metal Locknuts are nuts with slightly distorted threads that lock onto a bolt. Re-use is usually not possible due to the damage that occurs to the threads upon removal. Grade C nuts have a greater tensile strength than nuts graded as A or B.

Hex Finish Nuts

Hex Finish Nuts are fasteners with female threads used to attach to a bolt.

Hex Reversible LN

Hex Reversible Locknuts are similar to all metal locknuts, but may be installed on either side up.

Slotted Hex Nut

Slotted Hex Nuts are nuts with slots that have been designed to allow a cotter pin to be inserted through a slot and a pre-drilled in the fastener in order to prevent the nut from becoming loose.

KEPS Nuts

Keps Nuts are nuts with an attached free-spinning external tooth lock washer.

Machine Screw Nuts

Machine Screw Nuts are the same as hex finish nuts, except they are made for use on screws under 1/4 inch in diameter.

Nylon Insert LN

Nylon Insert Locknuts are nuts containing a nylon material at the top that, when installed, the bolt’s threads cut into the nylon so as to keeping the bolt from vibrating loose.

Toggle Wing Nut

Toggle Wing Nuts are nuts that are used to anchor a fastener into a hollow material such as a wall. Once inserted, the nut opens to prevent the fastener from pulling through.